All | Aquariums | Arduino | Btrfs | Cars | Cats | Clubbing | Computers | Diving | Dreamstate | Edc | Electronics | Exercising | Festivals | Flying | Halloween | Hbot | Hiking | Linux | Linuxha | Monuments | Museums | Oshkosh | Outings | Public | Rc | Sciencemuseums | Solar | Tfsf | Trips



Table of Content for computers:

More pages: June 2024 April 2024 December 2023 August 2021 May 2020 February 2016 July 2014 December 2013 November 2013 January 2013 August 2011 July 2011 August 2010 June 2010 May 2010 March 2010 February 2010 December 2009 November 2009 March 2009 July 2002 October 2001



2014/07/23 Making a super cheap water/flood sensor
π 2014-07-23 00:00 in Computers, Linuxha
I wanted a water sensor for my water heater that would both alert me in the house, and as remotely when the sensor was tripped.

This is what it looks like:


I analysed how the DS10A worked, and due to sheer luck in its design, the wires going to the magnetic sensor turn out to be ground and signal, and the water sensor conducted enough current between them to allow triggering of the DS10A:


Wiring is totally trivial, you only need to use a 3rd wire connected to the plus from the 2 batteries, and it "just works". For extra credit, I wired a buzzer between signal and ground, and my water sensor passed enough current to allow the buzzer to run.

I used the Phantom YoYo High Sensitivity Water Sensor which was $10, but apparently you can get one that should work too from seedstudio for $3

The DS10A, I have a stack of, which you can sometimes find on ebay for cheap in bundles, and my house is already wired to receive those signals, so it was trivial to generate an Email and page from misterhouse when this sensor got triggered.


More pages: June 2024 April 2024 December 2023 August 2021 May 2020 February 2016 July 2014 December 2013 November 2013 January 2013 August 2011 July 2011 August 2010 June 2010 May 2010 March 2010 February 2010 December 2009 November 2009 March 2009 July 2002 October 2001

Contact Email