Marc's Blog: arduino - IoTuz Driver ported to Expressif ESP32 WROVER board

2017/04/16 IoTuz Driver ported to Expressif ESP32 WROVER board

π 2017-04-16 01:01 in Arduino

As explained on this page, I wrote a pretty extensive driver-set for an ESP32 based board with lots of IO, but hardly anyone has that board (fewer than 100 made), so I ported what I could of the code to the WROVER.

Sadly the WROVER lacks a touch screen, so you'll have to wire at least a rotary encoder or a joystick. In the demo above I also wired 2 neopixels and an IR receiver to mirror the hardware on the IoTuz.

Source code: https://github.com/marcmerlin/IoTuz

See this video for a demo:

You'll definitely want to read https://github.com/marcmerlin/IoTuz/blob/master/README.md carefully, especially the WROVER section.

On an ILI3941 based WROVER, you should also be able to play tetris and breakout:

Enjoy!

See more images for IoTuz Driver ported to Expressif ESP32 WROVER board

Marc's Public Blog - Arduino Hacking