Marc's Public Blog - Arduino Hacking


All | Aquariums | Arduino | Btrfs | Cars | Cats | Clubbing | Computers | Diving | Dreamstate | Edc | Electronics | Exercising | Festivals | Flying | Halloween | Hbot | Hiking | Linux | Linuxha | Monuments | Museums | Oshkosh | Outings | Public | Rc | Sciencemuseums | Solar | Tfsf | Trips



Table of Content for arduino:

More pages: November 2024 June 2024 August 2023 June 2023 May 2023 April 2023 March 2022 January 2022 January 2021 December 2020 March 2020 January 2020 May 2019 April 2019 March 2019 January 2019 July 2018 May 2018 April 2018 January 2018 June 2017 April 2017 January 2017 February 2016 January 2015 September 2013 January 2012 December 2011 May 2011 January 2011



2011/01/20 Mobsendat Arduino board from Arduino Miniconf 2011
π 2011-01-20 01:01 in Arduino
After the last linux.conf.au, and my going to the arduino miniconf, I got (voluntarily I guess :) conned into learning about a new field: arduino. The learning curve was a bit steep since I started with the second miniconf which featured a pretty sweet board, the mobsendat one of the volunteers had just designed.
Mobsendat (mobile sensor data) offers pretty good IO that's useful to log to its built in sdcard: a DS18B20 1-wire temp sensor, a barometer (with 2nd temperature reading), a 3 axis accelerometer, and connectivity for a GPS, a 433Mhz radio chip, and a Zigbee chip, all this for barely over $100. It was designed to be put in rocket bodies to record the flights, but I figured I'd find other uses for it :)

I got to solder the whole thing during the miniconf:


all done
all done

Putting aside some problems due to a short in my board that came from a pre-soldered chip (not my fault :) ), it worked great. I was even able to hack in a dirty mod to let me unplug the GPS when I don't need it


Programming with arduino was reasonably easy. I haven't done much work on that specific board yet, but I have on the other one (next post).

2011/01/19 Pebble Shield from Arduino Miniconf 2010
π 2011-01-19 01:01 in Arduino
I missed the arduino miniconf in 2010, but I was able to buy the pebble shield from a former participant, along with an arduino mega board. This board was a bit better for me to first learn on than the mobsendat because it had more interactive I/O to play with (potentiometer, LDR, LEDs, LCD display, and more).

This gave me a chance to learn the Aiko framework from Andy Gelme, which allows for registering event handlers that get called at a specified interval. I ended up writing some handlers that were missing, like a button handler that calculates which combination of buttons is pressed from the combined resistance generated by the 3 buttons. I used this to tell the board at what frequency to flash an led based on potentiometer or LDR light input.


slightly improved version with LEDs connected to the relays
slightly improved version with LEDs connected to the relays

I have a video showing this live:

This was a good way to learn how to play with arduino and learn programming, as well as being a test platform for the Zigbee chips I bought. I'll get a chance to do some more serious work on my mobsendat after that.


More pages: November 2024 June 2024 August 2023 June 2023 May 2023 April 2023 March 2022 January 2022 January 2021 December 2020 March 2020 January 2020 May 2019 April 2019 March 2019 January 2019 July 2018 May 2018 April 2018 January 2018 June 2017 April 2017 January 2017 February 2016 January 2015 September 2013 January 2012 December 2011 May 2011 January 2011

Contact Email