Marc's Public Blog - Electronics Hacking

1) Oh, I need to finish writing code to get the SAO badge holder to do something fun

2) Mmmh, why does this python global variable thing doessn't work in the function

3) Goes to re-learn python, with help from gemini and how python forks global variables by default in functions so what you write to them isn't saved at local scope (oh my, why did they do that?)

4) after more hacking, get a proper demo working:

5) publish code https://github.com/marcmerlin/2024-Supercon-8-Add-On-Badge/blob/main/README.md (actual code is here: https://github.com/marcmerlin/2024-Supercon-8-Add-On-Badge/blob/main/software/software/main.py )

6) Oh, I need to make a video demo of the SAO, but...

7) oh yeah, there was that hat on my desk I needed to add LEDs on for an upcoming party, start hacking on that

8) mmmh, the hat won't work long enough with a USB battery, start hacking on a lipo solution

9) ah, lipos work, but the front LED panels rated for 5V start failing around 3.5V, so I need to make a dual lipo solution, one for the neopixels and one for the RGB panels

10) test and measure the dual lipo solution and figure out it will last close to 12H, that's good. Ok, hat works mostly, post that https://www.instagram.com/p/DCYEl1jJd_-
11) Ah yes, the SAO video I was supposed to work on: https://www.youtube.com/watch?v=z7MSywf7js4

12) During that time, I get interesting distracting packages on my doorstep, like lovely flexible LED panels that will hopefully power my future outfit: https://rpi-rgb-led-matrix.discourse.group/t/rpi0-2w-speed-compared-to-rpi3a/913/2

13) While I'm testing them, also try some new rPi0 2w chips and microcontrollers to see if they can power my LED outfit with a smaller form factor (and yes they can): https://rpi-rgb-led-matrix.discourse.group/t/rpi0-2w-speed-compared-to-rpi3a/913 . In the interest of briefty, I'm going to skip the part that included migrating from raspbian to a new dietpi linux distro and port back all my custom changes on it :)

14) That said, I had a long-ish discussion and planning with the electrodragon folks in China on how to make a new 3 channel daughter board that is much smaller and would decrease the over footprint of all new picture frames like the one I built, and of course my LED outfit.

15) but wait, now I also find out there is a new beaglebone solution that does 6 channels output instead of 3? Ok, make a post about it: https://rpi-rgb-led-matrix.discourse.group/t/interesting-6-port-board-beaglebone-pocketcroller-v2/918/2

16) and file a couple of RFE bugs to look into it: https://github.com/hzeller/rpi-rgb-led-matrix/issues/1733 + https://github.com/FalconChristmas/fpp/issues/2054

17) Oh, I just found this old video on my laptop, why did I never post it? Ok, fix that: https://marc.merlins.org/perso/linux/post_2021-01-23_Linux_conf_au-2021-LED-Talk.html

18) Mmmh, so when I quickly posted those pictures from Neil deGrasse Tyson who just gave a talk, I got a reminder it was annoying for my blog system not to be able to link to videos directly without having to upload them to youtube.

19) Ok, learn about html5 video tag, hack my blog system to support videos, and push a new blog with my first video tag: https://marc.merlins.org/perso/outings/post_2024-11-14_Neil-deGrasse-Tyson-back-at-San-Jose-Center-for-Performing-Arts_-An-Astrophysicist-Goes-To-The-Movies_-the-Sequel.html

20) ok, but why did I have to rescue my video from my phone because the H265 recompressed version did not work in the blog? Ah, because of royalties on H265 being too high, most browsers refuse to add support for it: http://marc.merlins.org/perso/linux/post_2024-11-17_Vidrename-Script_-Clean-up-Normalize-Video-Filenames-and-Add-Codec-And-Container-Format-With-Mplayer.html

21) Ok, sure, but now I need to upgrade my vidcomp script to support VP9 and AV1: http://marc.merlins.org/perso/linux/post_2024-11-17_Vidcomp-Script_-recompress-videos-on-linux-with-mencoder-or-ffmpeg-to-div3_-div4_-div5_-xvid_-mpeg4_-h264_-h265_-VP9_-and-AV1.html

22) then I find an Email from a chinese engineer who is willing to talk to me about making better LED shoes. That's exciting, let me reply to him first

23) ok, now I can recompress my videos to VP9, which I benchmarked to somehow be faster to compress and still smaller file size than AV1 (not supposed to be the case, but that's what I'm getting). On the plus side, VP9 works with more browsers than AV1.

24) what as I doing again? (now days have passed). Oh yes, I was supposed to write a blog on hackaday supercon: http://marc.merlins.org/perso/electronics/post_2024-11-01_Pasadena-Hackaday-Supercon-2024.html

25) of course the ridiculous amount of time spent to allow these 2 videos in that post, is a bit hard to justify, but it's really solving a problem I've had for over 10 years, and never got to the top of the pile, because, well, you see what happens when I try to put something on top of the pile :)

26) and I was good, I didn't even play with the micropython rpi micro I received in the mail this week, or the electromage pixelblaze and I/O board, or more LED panels that somehow showed up at my doorstep :)

27) mmmh, and there are all those webcams I ordered and need to configure, but now it's clear I'm going to have to re-install my camera controller, shinobi, from scratch, and that's yet another rabithole...

28) in the meantime I have to finish my LED hat, and design my new shirt and pants for Dreamstate in 4 days... Wish me luck :)