Marc's Public Blog - Linux Hacking


All | Aquariums | Arduino | Btrfs | Cars | Cats | Clubbing | Computers | Diving | Dreamstate | Edc | Electronics | Exercising | Festivals | Flying | Halloween | Hbot | Hiking | Linux | Linuxha | Monuments | Museums | Oshkosh | Outings | Public | Rc | Sciencemuseums | Solar | Tfsf | Trips



>>> Back to post index <<<

2021/01/23 Hacking 2 LCA/Linux.conf.au SAO Badges, Micropython and Double SPI Quad Screen C++ One
π 2021-01-23 01:01 in Arduino, Linux
The LCA organizers were nice enough to send me a couple of badges for the LCA 2021 virtual conf (virtual because of covid). It was a chance to try micropython. That part was interesting, but the regular ESP32 wasn't the best chip for micropython, installing new version of the code and testing it had too much overhead compared to the newer S2/S3 chips that are supported by adafruit's micropython fork where it's much quicker to install new code and test it:

I hacked the capacitive touch SAO penguins to add obvious missing stuff :)
I hacked the capacitive touch SAO penguins to add obvious missing stuff :)


The 2nd board, I couldn't help but put a hole in it and install SPI screens:

started with one screen
started with one screen

then got the 2 original I2C screens to display blinking eyes and worked on the SPI screen
then got the 2 original I2C screens to display blinking eyes and worked on the SPI screen

SPI is a bus that allows multiple devices, so I added 2 screens
SPI is a bus that allows multiple devices, so I added 2 screens

getting the Arduino_GFX lib to support both screens was a bit challenging, but got it working
getting the Arduino_GFX lib to support both screens was a bit challenging, but got it working

And here is the last result with everything working and running 5 different demos on 4 screens:

Please go [this page: FastLED_ArduinoGFX::TFT on top of Framebuffer::GFX for SPI TFTs like SSD1331 or ILI9341] for details on how this was built and how to use my TFT library with multiple TFTs|/perso/arduino/post_2022-01-02_FastLED_ArduinoGFX_TFT-on-top-of-Framebuffer_GFX-for-SPI-TFTs-like-SSD1331-or-ILI9341.html]: https://marc.merlins.org/perso/arduino/post_2022-01-02_FastLED_ArduinoGFX_TFT-on-top-of-Framebuffer_GFX-for-SPI-TFTs-like-SSD1331-or-ILI9341.html


More pages: July 2002 February 2004 March 2004 November 2004 April 2005 August 2005 January 2006 July 2006 August 2007 November 2007 January 2008 October 2008 November 2008 December 2008 January 2009 May 2009 July 2009 August 2009 September 2009 November 2009 December 2009 January 2010 March 2010 April 2010 June 2010 August 2010 October 2010 January 2011 July 2011 August 2011 December 2011 January 2012 March 2012 May 2012 August 2012 December 2012 January 2013 March 2013 May 2013 September 2013 November 2013 January 2014 March 2014 April 2014 May 2014 October 2014 January 2015 March 2015 May 2015 January 2016 February 2016 June 2016 July 2016 August 2016 October 2016 January 2017 September 2017 January 2018 March 2018 December 2018 January 2019 January 2020 May 2020 January 2021 September 2021 March 2023 April 2023 December 2023 June 2024 November 2024

>>> Back to post index <<<

Contact Email