Detecting more breaths and killing noise

• I had two problems: too much noise, likely due to a high impedance, and not enough amplitude in some sleep positions.

• When sleeping on my tummy, not enough of the belt moves, and it may be stuck under my body.

• A longer belt seemed like a way to detect movement all around my chest.

• But to compensate for increased resistance (mine was already too high), I put a triple layer of fabric. This brought resistance down to 10kOhm, this sounded perfect!

• Results were disappointing, the noise didn't go away, and the amplitude measured went down since the amount of stretch per fabric length was lower.

• So, back to a smaller single piece of fabric.